5-GLUEGTEC250 GLUE GUN

The TEC250 Glue Gun is our simplest lightweight, professional glue gun. It is best used where small quantities of adhesive are required in product assembly, packaging and general use. This glue gun has high quality self regulating heater controls and is designed for years of trouble free service.

5-GLUEGTEC700 GLUE GUN

The TEC700 glue gun is designed for continuous operation and heavy duty use. This glue gun is simple yet robust with a highly efficient melt chamber with a powerful 300W stainless steel cartridge heater which ensures an output of 2kilos of molten adhesive per hour.

5-GLUEGPTEC3200 GLUE GUN

The TEC3200 high output glue gun is loaded with two TECBOND 43mm cartridges which means it never runs out of adhesive – one always remains in the gun ready to go at the right temperature. This glue gun is ideal for product assembly, packaging, sealing, electrical potting and encapsulating. The highly efficient heater housing, coupled with a solid state adjustable temperature controller, guarantees adhesive at the right temperature when you need it.

5-GLUEGTEC6100 GLUE GUN

The TEC6100 glue gun is ideal for the most demanding applications. It is made to a very high standard with 500watt power and offers industry a rugged and reliable production tool at exceptional value for money. This glue gun uses a large 43mm glue cartridge and never runs out as a cartridge always remains in the gun at the right temperature, Reloading takes seconds and is indicated by an audible and visual signal minimizing downtime.

5-GLUEGTEC6300 GLUE GUN

The TEC6300 uses a spray applicator to apply the adhesive. This glue gun is totally self contained requiring only compressed air and electricity to operate. It takes only 10 minutes to heat up from cold and is fast and safe to reload using 43mm adhesive cartridges. The GPTEC6300 glue gun is the highest output, hand held industrial hot melt spray glue gun available. It is totally solvent free and non-toxic.

5-GLUEGTEC8200 HOT MELT GLUE DOT DISPENSER

The TEC8200 is designed to dispense a peelable or removable adhesive glue dots. The adhesive glue dot provides a temporary bond of glue for promotional material similar to preformed glue dots on a roll but with savings of over 60%. The glue dots can be of different sizes from 7mm – 30mm diameter or a single line if required. The unit is all electric, so no compressed air is required. The adhesive glue in the TEC8200 is dispensed by a small piston pump that is operated by a small hand lever or with the optional foot pedal.

HOT MELT GLUE

Hot Melt Glue is made from 100% solid non-toxic adhesive containing no solvents or water. Hot Melt Glue is available in sticks, slugs or pellets. The Glue is heated in the chamber of the Hot Melt Glue Gun to form a liquid adhesive that is extruded through the nozzle of the gun when the trigger is gently squeezed. The Molten Adhesive is applied to one surface of the product with the item to be attached pressed together to form a permanent bond or seal. Hot Melt Adhesive is available in many formulation to suit almost any application.