Get Packed supplies a wide range of shrink tunnels to suit all types of budgets, speeds and capacities. Our range starts at a simple economical model with a 6 inch high tunnel perfect for the smaller packaging Requirements working through to larger shrink tunnels up to heights of 28 inches (711mm) with higher speeds, and can work behind automatic L-Bar sealers or multiple L-bar sealer production lines. All of our range of shrink tunnels features fully re-circulating air chambers with AC variable speed drives and anti-jam safety features. Other standard features include 4 directional air flow; automatic tunnel cool down with shut off; thermal overload protection on all motors; adjustable air velocity control; chromed conveyor rollers and shafts (no rust); solid state digital temperature control; sealed bearings on drive and idler shafts and locking casters with levelling screws. Optional features include dead rollers for polyethylene films, side guide rails in tunnel, non-standard voltage, custom paint, spare parts kits and extended infeeds or discharge conveyors.

This is the most economical shrink tunnel in our range. There are two models - a 110 volt and a 220 volt and both are perfect for smaller packaging requirements as they have tunnel dimensions of (W) 400mm x (H) 150mm and 500mm in length, but an optional height of 200mm is available. Features include a fully re-circulating air chamber for an even air flow, temperature and velocity from four different directions which results in the best possible shrink for your package. The tunnel curtains are made of reinforced silicone rubber which minimises heat loss and therefore maintains an accurate tunnel temperature. A range of conveyor options are available such as a standard live conveyor with 1 inch spacing's or a high density roller with ½ inch spacing's and more. There is also a range of discharge conveyors available such as Lazy Susans, straight conveyors or a flexible skate wheel with varying widths. As a standard our shrink tunnels feature an AC variable speed drive with a built in fuse protection and automatic tunnel cool down with shut off.

The GP1808-28 shrink tunnel is next in our range and is perfect for the small to medium packaging requirements. It has tunnel dimensions of (W) 460mm x (H) 200mm and 710mm in length, but an optional height of 300mm is available. Features include tunnel curtains are made of reinforced silicone rubber which minimises heat loss and therefore maintains an accurate tunnel temperature; a fully re-circulating air chamber for an even air flow, temperature and velocity from four different directions which results in the best possible shrink for your package. A range of conveyor options are available such as a standard live conveyor with 1 inch spacing's or a high density roller with ½ inch spacing's and more. There is also a range of discharge conveyors available such as Lazy Susans, straight conveyors or a flexible skate wheel with varying widths. As a standard our shrink tunnels feature an AC variable speed drive with a built in fuse protection and automatic tunnel cool down with shut off.

HEAT SHRINK TUNNEL MODEL GP1808-44

This is a medium speed tunnel which can be used behind an automatic L-Bar sealer. Tunnel dimensions are (W) 460mm x (H) 200mm and 1120mm in length, but an optional height of 400mm can be arranged.  A range of conveyor options are available such as a standard live conveyor with 1 inch spacing's or a high density roller with ½ inch spacing's and more. There is also a range of discharge conveyors available such as Lazy Susans, straight conveyors or a flexible skate wheel with varying widths. Features include a fully re-circulating air chamber for an even air flow, temperature and velocity from four different directions which results in the best possible shrink for your package. The tunnel curtains are made of reinforced silicone rubber which minimises heat loss and therefore maintains an accurate tunnel temperature. As a standard our shrink tunnels feature an AC variable speed drive with a built in fuse protection and automatic tunnel cool down with shut off.

HEAT SHRINK TUNNEL MODEL GP2208-48

The GP2208-48 is one of the more popular tunnels as it has dimensions of (W) 560mm x (H) 200mm and 1220mm in length. An optional height of 710mm is also available. Features include a fully re-circulating air chamber for an even air flow, temperature and velocity from four different directions which results in the best possible shrink for your package. The tunnel curtains are made of reinforced silicone rubber which minimises heat loss and therefore maintains an accurate tunnel temperature. A range of conveyor options are available such as a standard live conveyor with 1 inch spacing's or a high density roller with ½ inch spacing's and more. There is also a range of discharge conveyors available such as Lazy Susans, straight conveyors or a flexible skate wheel with varying widths. As a standard our shrink tunnels feature an AC variable speed drive with a built in fuse protection and automatic tunnel cool down with shut off.

HEAT SHRINK TUNNEL MODEL GP3610-60

The GP3610-60 shrink tunnel has a fully re-circulating dual air chamber with dual variable air velocity and has tunnel dimensions of (W) 915mm x (H) 250mm and 1525mm in length. An optional height of 710mm can be arranged. This model is also available with a dead roller and cooling fan if you are using polyethylene shrink film. Features include a fully re-circulating air chamber for an even air flow, temperature and velocity from four different directions which results in the best possible shrink for your package. The tunnel curtains are made of reinforced silicone rubber which minimises heat loss and therefore maintains an accurate tunnel temperature. A range of conveyor options are available such as a standard live conveyor with 1 inch spacing's or a high density roller with ½ inch spacing's and more. There is also a range of discharge conveyors available such as Lazy Susans, straight conveyors or a flexible skate wheel with varying widths. As a standard our shrink tunnels feature an AC variable speed drive with a built in fuse protection and automatic tunnel cool down with shut off.

HEAT SHRINK TUNNEL MODEL GP1808-72

This shrink tunnel is a high speed (up to 180FPM) tunnel with dual 1HP blower motors with dual air velocity control, fully re-circulating air chambers and emergency stop switches on each end. Tunnel dimensions are (W) 460mm x (H)200mm and a length of 1830mm. An optional height of 710mm can be arranged. A range of conveyor options are available such as a standard live conveyor with 1 inch spacing's or a high density roller with ½ inch spacing's and more. There is also a range of discharge conveyors available such as Lazy Susans, straight conveyors or a flexible skate wheel with varying widths. As a standard our shrink tunnels feature an AC variable speed drive with a built in fuse protection and automatic tunnel cool down with shut off. Features include a fully re-circulating air chamber for an even air flow, temperature and velocity from four different directions which results in the best possible shrink for your package. The tunnel curtains are made of reinforced silicone rubber which minimises heat loss and therefore maintains an accurate tunnel temperature.