Peelable Hot Melt Adhesive | Techbond Peeltec 210 Removable Glue (Priced per Kg - 5Kg boxes)

 Peeltec 210 Safety Data Sheet

Hot Melt Glue adhesive provides an instant and permanent bond between a vast range of materials and can be used for a wide range of applications such as; packing and carton sealing; potting and encapsulating; sealing, gap filling and reinforcing; repair or assembly just to name a few. There are two methods of applications – bead (or dot) and spray. Bead is a continuous bead of molten glue with the thickness, spread and pattern controlled by the operator. Spray is where the molten glue is sprayed from the TEC6300 glue gun which can be more advantageous as it is more economical with the amount of glue used and the molten glue is spread over a wider area and is more suitable for heat sensitive material that can be damaged by bead application.
*EVA is Ethyl Vinyl Alcohol

• First on Left: a 1.5mm wide bead enables approx 560 linear m/kg
• Second from Left: a 3mm wide bead enables approx 153 linear m/kg
• Middle: a 6mm wide bead enables approx 67 linear m/kg
• Second from right: a 10mm wide bead enables approx 46 linear m/kg
• Far right: a 12.5mm wide bead enables approx 31 linear m/kg
• In comparison a small dot of glue approx 0.7cm wide gives approx 6600 dots/kg
• Small dot approx 1.3cm wide give approx 3390 dots/kg
• Medium dot approx 2cm wide gives approx 1520 dots/kg
• A large dot approx 3cm wide gives approx 735 dots/kg